STAGE 013

 Return to the BUILD


“Next you’ll build the left gearbox following the same steps as the previous stage.

 

Contents


Parts

Materials: The Gearbox (Left) is metal and the other parts are plastic.

Build


Building the Left Gearbox

Step 1

Fit the pin and post of the Driveshaft through the matching holes on this side of the Brake Disc, as shown:

Step 2

Fit the exposed post of the Driveshaft through the matching hole at this end of the Driveshaft Housing, as shown:

Step 3

Secure the Driveshaft to the Housing from the inside with one (1) PS23 screw:

Step 4

Fit the pin and post of the Driveshaft Housing into the matching holes on the side of the Gearbox (Left), as shown:

Step 5

Secure the Housing to the Gearbox from the inside with one (1) PS01 screw:

Thoughts


Nothing too crazy here as we just repeated previous steps to build this left side of the Gearbox. These will come together in the next stage.

Next Up


 Stage 014 – Gearbox Cover, Gearbox Plate

Leave a Reply

Your email address will not be published. Required fields are marked *